home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magnum One
/
Magnum One (Mid-American Digital) (Disc Manufacturing).iso
/
d7
/
jmd4tlx.arc
/
JXFER.DOC
< prev
next >
Wrap
Text File
|
1989-03-30
|
15KB
|
382 lines
ENHANCED JMODEM FILE TRANSFERS
using
THE TELIX SALT LANGUAGE
by
Michael K. Bozovich
03/20/89
-----PHILOSOPHY------------------------------------------------------
When I first began using the Jmodem protocol, I was blown away!
I had been using Zmodem and thought that there was no way to beat
it's file transfer rate. At the same time, I was dismayed by the
limitation of one file per transfer. After considering this dilemma,
I set out to to enhance the capabilities of the basic Jmodem driver
in the hopes that the use of this advanced protocol would become
widespread. This set of scripts is at least a step in the right
direction. . .
This set of TELIX 3.11 script files will allow the seamless (almost)
integration of the JMODEM protocol into the TELIX program.
-----PROGRAMS--------------------------------------------------------
The files in this package should consist of:
JXFER.DOC // These instructions.
JUP.SLT // Source code for the upload stub.
JUP.SLC // Compiled upload stub.
JDOWN.SLT // Source code for the download stub.
JDOWN.SLC // Compiled download stub.
JXFER.SLT // Source code for the "inner workings".
JXFER.SLC // Compiled "inner workings".
JSIZE.C // Source code for the "kludge".
JSIZE.EXE // Compiled "kludge".
JMODEM.COM // The Jmodem driver.
JMODEM.DOC // The Jmodem Documentation.
-----INSTALLATION----------------------------------------------------
A. The first step in integrating Jmodem is to tell TELIX the following
in the "File transfer protocols" Setup screen:
1. Key - Whatever you like. (I use "J".)
2. Protocol Name - "Jmodem"
3. Upload Filename - "JUP"
4. Download Filename - "JDOWN"
5. BAT or Script - "Script"
6. DL Name - "N"
Your screen should resemble this:
╒═╡ File transfer protocols ╞══════════════════════════════════════════╕
│ │
│ External Key Protocol Upload Download BAT or DL │
│ Protocols Name Filename Filename Script Name │
│ │
│ A................. J Jmodem JUP JDOWN Script N │
│ │
│ B................. │
│ │
B. The next step is making sure that all of the necessary files are where
they belong:
1. The following files belong in the "Script directory".
This is where you told TELIX to look for script files.
(Option "C" in the filename/path setup.)
JUP.SLC
JDOWN.SLC
JXFER.SLC
2. These files must reside somewhere in the DOS PATH.
If they are not there, don't say I didn't tell you!
JMODEM.COM
JSIZE.EXE
C. That's all there is to it. You can begin using JMODEM with
TELIX as though it came with the package!
-----USAGE-----------------------------------------------------------
These script files provide much more versatility than the standard
"BATCH file" method of adding an external protocol. These are some
points to consider:
1. UPLOAD -
Although some BBS's don't support it (yet), for those that
do, you can now use JMODEM to Batch Upload as many filespecs
as you can fit in the "upload box". You are free to use
wildcards as well. All I ask (and the script file requires!),
is that you include ONE OR MORE SPACES between multiple
filespecs.
2. DOWNLOAD -
Although TELIX doesn't allow multiple filespecs to be
entered in the "download box", the JDOWN script file
will accept them without a hitch. This was accomplished
by supplying an emulation of the "download box". This
WILL NOT WORK if you didn't tell TELIX to not prompt
for the download file name as instructed above!
You MAY NOT use wildcards in your download filespecs.
If you attempt to do so, the script will gripe about
it and grind to a halt. Sorry. I will include this
feature as soon as JMODEM recognizes the name of the
incoming file.
3. PERFORMANCE LOGGING -
In addition to the features described above, this set
of scripts will create and maintain a log file of all
attempted JMODEM transfers. If you have defined a
TELIX environment variable as described in the TELIX
documentation, the file will be placed there. If not,
the file will be written indiscriminately to whatever
drive and subdirectory you happen to be in at the time.
This file is named JMODEM.LOG (catchy, eh?), and is
based on the log file produced by the DSZ.COM program.
Here is a sample:
TELIX JMODEM File Transfer Log
S 7504 2400 bps 0 cps 17s 03-19-89 *ABORTED* \config.sys
R 8388 2400 bps 247 cps 34s 03-19-89 COMPLETED c:\dl\any.zip
S 15112 2400 bps 0 cps 17s 03-19-89 *ABORTED* a:\autoexec.bat
R 26796 2400 bps 245 cps 109s 03-19-89 COMPLETED f:\dl\foo.zip
R 18208 2400 bps 247 cps 74s 03-19-89 COMPLETED .\bar.zip
- The first field indicates whether a (S)end or a (R)eceive
was attempted.
- The second field is the number of bytes transferred.
- The third field is the baud rate used for the transfer.
- The fourth field is a measure of the approximate trans-
fer speed in characters per second. Actual transfer
rates will be greater than those reported. This rate
is set to zero if the transfer was aborted.
- The fifth field is an approximation of the transfer
time in seconds. Since this time includes the time
required to load the JMODEM driver from disk, it's
accuracy depends largly on the speed of the drive
used. Actual transfer times will be less than those
reported.
- Field six is the date the transfer was attempted.
- Field seven indicates whether the transfer met
with success.
- Finally, field eight is the complete specification
of the file involved.
4. PATH SUPPORT -
The pathnames used in uploading/downloading work ex-
actly as described in the TELIX documentation. Here
is a review:
- If you specify a path in the filespec, the script
will respect your wishes.
- If you do not specify a path, the script will use
the one you specified in 'setup'.
- If you did not specify a path in 'setup' (shame!),
the file will end up/come from the current directory.
- When uploading, if any single file is not found,
the script will note it in the log and continue
with the next file. The fact is not noted on the
terminal.
- When downloading, if any single file already exists,
the script will make an entry of "*ABORTED*" in the
log and continue with the next file. This fact is
noted on the terminal. NOTE: This works differently
than the method advertised in the JMODEM.DOC file.
This is strictly MY DOING and IS NOT A BUG in JMODEM!
5. SOURCES OF TROUBLE -
This set of scripts uses up AT LEAST TWO file handles
at ANY GIVEN POINT during execution. The Jmodem driver
may use up more during IT'S execution. If you are ex-
periencing problems, try beefing up "FILES=" in your
CONFIG.SYS.
If you are still having problems, go back and re-check
your installation. If you do it 'by the numbers' and
STILL can't get it to work as advertised, you are wel-
come to contact me as described later in this document.
-----TECHNICAL INFO--------------------------------------------------
For those interested, here is an overview of how this system
works:
A. JUP.SLC -
This script simply calls JXFER.SLT with a parameter
indicating UPLOAD.
B. JDOWN.SLC -
This script draws a "download box" similar to the
one provided by TELIX. The difference is that you
can specify as many filespecs as you wish. After
the script obtains the file(s) to download, it checks
for wild cards in the list. If any are found, it
prints a diagnostic and aborts. If the user followed
instructions, it calls JXFER.SLC with a parameter
indicating DOWNLOAD.
C. JXFER.SLC -
This script does all the work involved with the file
transfer/logging functions. Based on the parameter
received, it determines whether it is going to Send
or Receive files. It then proceeds to get the comm
port number from TELIX and checks for prior existance
of the log file. If the log file is not found, it is
created and the header is written. Next, the first of
two loops is entered. These loops are best described
using pseudo code:
while (there are still files to transfer)
{
strip off a file name and qualify it with
regards to drive/path information;
if (uploading)
while (this filespec has wildcards)
{
get the first/next matching file;
upload it;
make a log entry;
}
else
if (file already exists)
print diagnostic;
else
{
download it;
make a log entry;
}
}
D. JSIZE.EXE - (The kludge)
This program was necessary to overcome a limitation
of the SALT language. Basically, it is impossible
to determine the size of a file in between calls
to the wild card expansion. Since I need to call
the logging function for every file transferred, and
the log needs the file size, I came up with this
workaround using a simple "C" program. The program
writes a 7 byte file that contains the size in bytes
of the file passed on the command line. The script
program later picks up this information and uses it
in the log entry. This temporary file is named
"JSIZE.$$$" and is erased just before JXFER.SLC re-
turns control to the terminal.
E. ERRORS -
I have implemented absolutely NO error checking
where opening/closing/reading/writing of files
are concerned. The files that could be affected
by this are associated with the logging function
and are in no way associated with the actual trans-
fer of files.
If you want more details, check out the source code
listings. They are generously commented.
-----DETAILS---------------------------------------------------------
1. While I have invested quite a bit of time in both
creating and testing these programs, I make ABSOLUTELY
NO GUARANTEE that they will work with your setup!
I also REFUSE TO BE HELD LIABLE for any problems they
may cause you. Use them at your own risk.
2. While I DO NOT request money for this work, I will
cheerfully accept any donations. Let your conscience
be your guide.
3. If you are at the end of your rope and are contemplating
suicide, you may contact me at the following address:
MICHAEL K. BOZOVICH
P.O. Box 878
Godfrey, IL 62035-0878
I will do what I can to help.
4. I hereby dedicate these programs to the Public Domain.
Distribute them as far and wide as you are able. All I
ask is that you distribute this set of files EXACTLY AS
YOU RECEIVED THEM! Adhering to this simple request will
seriously reduce the chances of my contracting an ulcer.
It will also give me faith to perhaps provide similar
functionality to other comm programs...
5. Above all else, ENJOY the Jmodem protocol!